Constant current driver type ADC – 20/XXXX

They are drivers (switching mode power supply – SMPS) with constant current output and galvanic isolation:

Energy efficiency more than 85%;

MTBF over 50000h;

Without current distorsion (power factor over 0,95 and low THDI);

Galvanic isolation input/output;

Protections (with automatic return to previous sheet after removing the couse of the fault):

– Shortcircuit;

– Overcurrent;

– No load (UVLO);

– Thermal (overheating).

Very small variation of the output current, versus variation of the input voltage;

Protection index IP44 (on requested can be Protection Index IP67);

Very small dimensions;

In according with CE directives (Low Voltage, EMC, RoHS);

Enviromental conditions:

– Temperature: -25°…to +70° C;

– Storage temperature: -30°…to +85° C;

– Humidity: 20… 90% (non-condensing).

Technical data:


Constant current driver type ADC – 40/xxxx

They are drivers (switching mode power supply – SMPS) with constant current output and galvanic isolation:

Energy efficiency more than 85%;

MTBF over 50000h;

Without current distorsion (power factor over 0,95 and low THDI);

Galvanic isolation input/output;

Protections (with automatic return to previous sheet after removing the couse of the fault):

– Shortcircuit;

– Overcurrent;

– No load (UVLO);

– Thermal (overheating).

Very small variation of the output current, versus variation of the input voltage;

Protection index IP44 (on requested can be Protection Index IP67);

Very small dimensions;

In according with CE directives (Low Voltage, EMC, RoHS);

Enviromental conditions:

– Temperature: -25°…to +70° C;

– Storage temperature: -30°…to +85° C;

– Humidity: 20… 90% (non-condensing).

Technical data:


Led Modules

LED modules are electronic devices consisting of SMD LEDs low or medium or high power soldered on ALPCB (Aluminium PCB) and the electronic devices for command and control. This devices can be integrated total or partially on the PCB with LEDs soldered.

LED modules can be configured according to customer requirements:

  • Design: rectangular, round or as customer drawing;
  • The number of LEDs, type and their performance (CCT, CRI, luminous flux, optical, etc.);
  • Technical requirements for electronic device (input power , input voltage, output current, power factor e.g.).

LED linear module type ALT600-3A:

Dimensions: 578mmx25mm;

Support: ALPCB, t=1.6mm;

LEDs used: 22pcs Luxeon 3535HV from Lumileds;

Input voltage: 230Vac/ 50Hz;

Input power : 16W;

Power factor: minimum 0.95;

Luminous Flux: minimum 1600Lm ;

CCT: 3000/ 4000/ 5000K by request;

CRI: minimum 80;

Input Connector (optional): Wago, SMD.

LED linear module type ALT600-3B:

Dimensions: 578mmx25mm;

Support: ALPCB, t = 1.6mm;

LEDs used: 88pcs type Luxeon 3014 (from Luminleds) or Duris E3 (from Osram);

Input voltage: 230Vac / 50Hz;

Input power: 18W;

Power factor: minimum 0.95;

Luminous Flux: minimum 1800Lm;

CCT: 3000/4000/5000K by request;

CRI: minimum 80;

Input Connector (optional): Wago, SMD.

Untitled-1