E14 Candle LED bulb’s are a new concept for indor lighting using LED’s as a light source in order to achieve maximum energy eficiency. They are used in place of clasic incandescent lamps (power i.e 25W) or CFL bulbs lamps (power i.e. 11W).

• Energy consumption by 75% less than the incandescent bulbs;
• Without infra-red and UV radiation;
• High reliability LEDs;
• Without current distorsions (high power factor and low current harmonics);
• High Color Rendering Index.

Technical data:

E27 LED bulb’s are a new concept for indor lighting using as a light source LED to obtine maximum energy efficiency. They are used instead conventional incandescent bulb socket E27, with powers of 40W, respectively 70W, or compact fluorescent bulbs socket E27 with powers of 9 or 22W.

• Energy consumption by 75% less than incandescent bulbs;
• Without infra-red and UV. radiation;
• High reliability LEDs;
• Without current distortions (high power factor and low current harmonics);
• High Color Rendering Index.

Technical data:

The LED panel lamps are a new generation of lamps to use the same technology of TV LED, where the light source (white LED’s) is placed on edges of a light guide, that direct light in front. They are lamps with a very small thickness (max. 20mm) and with various geometries according to requirements. They are used in place of fluorescent luminaire in residential areas, offices, etc.

• Energy consumption by 40% less than luminaires with fluorescent tubes;
• Without mercury;
• High reliability LEDs;
• High Color Rendering Index;
• LED’s used: white or RGB.

Date tehnice:

The LED tubes series ALT-xxxx are mercury-free and are very efficient in terms of energy. They have been development in order to replace the fluorescent tube T8 and T12 in the standard luminaires with fluorescent lamps.

They have been designed to be supplied directly from the electricity network, not requiring any intermediary components (ballast and starter) as it was the case of fluorescent tubes, thus resulting an additional saving besides the saving of 50-70% resulted from the reduction of electricity consumption.

Using LEDs with a colour temperature (CCT ) appropriate to the working environment, with a colour rendering index (CRI) of over 80% and removal of the disturbing effect of flickering from fluorescent luminaires contributed to the light comfort in the working environment, therefore a better light quality andincreased visual acuity. All these lead to the conclusion that the LED tubes series ALT/xxxx are to be used in relation to classical applications of indoor lighting and specialised applications, such as: refrigerating equipment, commercial areas where the light colour and colour rendering index are important.

The LED tubes series ALT-xxxx are designed and made of robust components, including the SMD LED and the controller managing the energy management, ensuring high reliability of the product, making it suitable for industrial applications and heavy duty environments (wide range of temperatures: – 40ºC..+70ºC).

The constructive solution chosen, with the constant current driver integrated on the same PCB as the LEDs, provides low weight, and an angle of radiation of over 200°.

Features:

• Designed and manufactured in Romania;
• SMD LEDs with a lifetime of more than 50000h;
• Luminous efficiency of more than 90Lm/W;
• Colour Temperature range from 3000K to 6000K;
• Power factor over 0.95;
• Minimum 2 year warranty period.

Modular industrial LED lamps (High Bays) and perimetral (projectors) represents a new concept of industrial lighting and outdoor lighting (buildings, sports grounds, etc.) in order to achive maximum energy efficiency. They are used in place high bay luminaires with gas discharge lamps (sodium or mercury) power 70 – 400W.

• Energy consumption by 50% less than discharge lamps in the gases;
• Without mercury;
• High reliability LEDs;
• LEDs type OSLON from OSRAM with high energy efficiency;
• Module with monobloc lens, sealed with gasket;
• Can be controlled by remote control.

Technical data:

Modular linear LED lamps are made of LED modules that integrates in them the light source (LED), monobloc lens (which directs the light beam at an controlled angle) and the electronic device-driver. These LED modules can be arranged in series-parallel combinations according to the needs of lighting design. They are used in industrial ligthing, offices, residential, commercial, i.e.

• Energy consumption by 50% less than the luminaires with gas discharge lamps;
• Without mercury;
• High color rendering index;
• Used a special optical system (lens and grid anti-glare) to ensure uniform iluminance in (lux) on top of the working surface;
• Can be remote controll (wireless or PLC) in a smart lighting system;

Technical data:

Features

• Power LEDs type OSLON from OSRAM or COB type Vero 18 from Bridgelux with high energy efficiency;
• Body of die-cast aluminium alloy with a optimized design for excellent heat dissipation;
• High efficiency optical system;
• Constant current driver with PWM dimming;
• Two versions pole mount: whit fixed arm or adjustable arm +/- 90º.

Technical data:

Features

• Power LEDs type OSLON from OSRAM with high energy efficiency;
• Body of die-cast alumunium alloy with a design optimized for excelent heat dissipation:
• High efficiency optical system;
• Constant current driver with PWM dimming;
• Two versions pole mount: whit fixed arm or ajustable arm +/- 90º.

Technical data:

They are drivers (switching mode power supply – SMPS) with constant current output and galvanic isolation:

Energy efficiency more than 85%;

MTBF over 50000h;

Without current distorsion (power factor over 0,95 and low THDI);

Galvanic isolation input/output;

Protections (with automatic return to previous sheet after removing the couse of the fault):

– Shortcircuit;

– Overcurrent;

– No load (UVLO);

– Thermal (overheating).

Very small variation of the output current, versus variation of the input voltage;

Protection index IP44 (on requested can be Protection Index IP67);

Very small dimensions;

In according with CE directives (Low Voltage, EMC, RoHS);

Enviromental conditions:

– Temperature: -25°…to +70° C;

– Storage temperature: -30°…to +85° C;

– Humidity: 20… 90% (non-condensing).

Technical data:

They are drivers (switching mode power supply – SMPS) with constant current output and galvanic isolation:

Energy efficiency more than 85%;

MTBF over 50000h;

Without current distorsion (power factor over 0,95 and low THDI);

Galvanic isolation input/output;

Protections (with automatic return to previous sheet after removing the couse of the fault):

– Shortcircuit;

– Overcurrent;

– No load (UVLO);

– Thermal (overheating).

Very small variation of the output current, versus variation of the input voltage;

Protection index IP44 (on requested can be Protection Index IP67);

Very small dimensions;

In according with CE directives (Low Voltage, EMC, RoHS);

Enviromental conditions:

– Temperature: -25°…to +70° C;

– Storage temperature: -30°…to +85° C;

– Humidity: 20… 90% (non-condensing).

Technical data: